Model No.: DH12~DH1400
The desiccant Air Dryer uses molecular sieve or alumina as the desiccant to adsorb moisture in the compressed air under a certain working pressure. Then, re-lead a part of dry air from the dryer outlet for desorption at atmospheric pressure. One tower is for water adsorption and another for desorption and regeneration. The two towers can work continuously to provide the air consuming equipment with dry, clean compressed air.
The twin tower dryer is widely used for outdoor applications requiring compressed air in cold areas, indoor applications requiring compressed air of long-distance pipeline transportation, and manufacturing process requiring deep drying, such as advanced spraying, jet flow control, polyester spinning etc.
According to the demand on the air consumption for regeneration, the desiccant air dryer are divided into no heat type and micro heat type.
|Model ||Capacity |
m 3 /min
|Outlet connection |
|DH-55||5.5||1000×500×1920||220||G 1 1/2|
|DH-69||6.9||1070×500×1860||350||G 1 1/2|
|All products are designed according to the international standard ISO7183.|
Inlet temperature: < 40 centidegree ,Working pressure: < 10bar.
Dew point temperature: < -40 centidegree ,Loss air: < 15%
Contact us if you need more details on Regeneration Air Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Air Dryers、Desiccant Dryer. If these products fail to match your need, please contact us and we would like to provide relevant information.